Consumes only 6W to replace 50W halogen or incandescent lighting Complete range with CRI over 80 High lumen effi cacy of 66-80lm/W Featured in Fully dimmable Retrofits into vast majority of MR16 shape fi xtures Available in accurate beam angles of 24°/36° Outstanding thermal solution allows for usage in commercial application Reliable 30,000 hours lifetime UL Listed and Manufactured under ISO 9001 : 2008
LED Accent lighitng use advanced LED technology providing:
More energy efficiency than traditional lighting
No UV rays (best choice for picture or product display light,
UV-free light will avoid color change or damage of displayed products or photos)
Environmental, reduce CO2 release, slow down greenhouse effect/micro-mercury used; Instant on
Cost saving compared to traditional lighting:
Longer life* reduces maintenance cost (More than 10th than average life of halogen)
High efficiency reduces electricity cost
Significantly less generated heat reduces air conditioning requirements
• Perfect retrofit solution for traditional 50W GU5.3 halogen lamp
• Simple housing design,easy to install and replace
• Lifetime of up to 30,000 hrs
• Overall colling design,low light attenuation
• Application：
Accent lighting,Shops,Restaurants,Hotels
Galleries, Exhibitions ,Museums
1. CCT range complies to ANSI C78.377-2008
2. Rated average life based on engineering testing and probability analysis
3. Lifetime test consistent with LESNA LM80 lumen maintenance procedure
Environmental friendly - No mercury or Lead 80% energy saving compared to halogen lamps Maintenance free operation, last up to 20 times longer than conventional lamps Suitable for accent and general lighting ( e.g. Lobby , Shops and Reception areas)
LED Accent lighitng use advanced LED technology providing:
Replacement halogen spotlights for accent lighting, especially where UV or IR radiation is undesirable.
Showcase lighting for bars, offices,shopping mall,museums, art galleries, cosmetic counters, restaurants.
hotel, shop, exhibition house, etc..
Residential lighting for bedroom, drawing room,study house, kitchen, etc.
·Turn power off before inspection, installation, or removal.
·Risk of Electric Shock – Do not use where directly exposed to water or weather.
·Suitable for damp locations.
·Suitable for use in open luminaries (fixtures).
·Do not use in enclosed fixtures.
·Do not open – no user serviceable parts inside.
Do not install lights in a closed, moist, polluted environment
Used indoor only, the lamp is not water proof.
Don't touch it directly when it the light is on
It’s better to use in good air circulation environment.
It's not allowed to be used in corrosive environment.
Working place temperature should be within -20-45℃.
And environment humidity should be less than 80%.
·This device is not intended for use with emergency exit fixtures or emergency exit lights.
·This device complies with Part 15 of the FCC rules and has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Keepy it away from paper or any flammable material
Avoid direct eye explosure to the lamp when it is working.
